Infrared Obstacle Avoidance Sensor Module For Smart Car Robot
from
€0.50 (0.98лв)
Price in reward points: 50
5 or more €0.46 (0.90лв)
- Stock: 8
- Brand: OEM
- Reward Points: 2
- Model: Infrared Obstacle
- Product Code: 6102
- Warranty: няма
Products Sold: 29
Product Views: 269
This infrared obstacle avoidance sensor module is an essential component for smart robots and obstacle avoidance projects. It operates on the principle of active infrared reflection: the sensor emits infrared light and detects the reflection from objects in front of it. When an obstacle is detected within the adjustable range of 2 to 30 cm, the module outputs a digital signal (low level), notifying the microcontroller (such as Arduino or ESP). With a built-in LM393 comparator for stability, a potentiometer for sensitivity adjustment, and an operating voltage of 3.3V–5V, it is extremely easy to integrate. The module is ideal for educational and hobbyist projects such as self-driving cars, line-following robots, and alarm systems.
The sensor module adaptable to ambient light, having a pair of infrared emitting and receiving tubes, transmitting tubes emit infrared certain frequency, when the direction of an obstacle is detected (reflection surface), the infrared reflected is received by the reception tube, After a comparator circuit processing, the green light is on, but the signal output interface output digital signal (a low-level signal), you can adjust the detection distance knob potentiometer, the effective distance range of 2 ~ 30cm, the working voltage of 3.3V- 5V. The detection range of the sensor can be obtained by adjusting potentiometer, with little interference, easy to assemble, easy to use features, can be widely used in robot obstacle avoidance, avoidance car, line count, and black and white line tracking and many other occasions.
Parameters:
1. When the module detects an obstacle in front of the signal, the green indicator lights on the board level, while the OUT port sustained low signal output, the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer, detects the distance increases; counterclockwise adjustment potentiometer, reducing detection distance.
2. The sensor active infrared reflection detection, target reflectivity and therefore the shape is critical detection distance. Where the minimum detection distance black, white, maximum; small objects away from a small area, a large area from the Grand.
3. The sensor module output port OUT port can be directly connected to the microcontroller IO can also directly drive a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO
4. Comparators LM393, stable;
5. The module can be 3-5V DC power supply. When the power is turned on, the red power indicator lights;
6. With the screw holes 3mm, easy fixed installation;
7. Board size: 3.2CM * 1.4CM
8. Each module has been shipped threshold comparator voltage adjusted by potentiometer good, non-special case, do not adjustable potentiometer.
Module Interface Description:
1. VCC 3.3V-5V external voltage (can be directly connected to 5v and 3.3v MCU MCU)
2. GND GND External
3. OUT small board digital output interface (0 and 1)
- Доставка до адрес: €5.00
- Доставка до офис на Еконт: €4.50
- Доставка до офис на Спиди: €3.50
- Доставка до автомат на Спиди: €2.50
- Доставка до BOXNOW: €2.00
- За фиксиран час се добавя €2.00
- Безплатна доставка при поръчка над €100.00
Всички поръчки се изпращат с застраховка и преглед. Моля при получаването на продукта да го прегледате пред куриера за евентуални наранявания при превоза.
Стоката се изпраща до 2 работни дни след направената поръчка. Имате право да върнете стоката в 14 дневен период, като цената на доставката при връщането е за ваша сметка.
NO DATA
