Wireless Industrial Remote Control Switch

This powerful wireless remote control system is engineered for reliable operation in the most demanding industrial environments. With a range of up to 1000 meters in open areas, it gives you the freedom to control machinery, gates, cranes, lighting, and motors from a safe distance, eliminating the need for complex cabling. The receiver is built with a high IP65/IP66 protection rating, making it resistant to dust, moisture, and vibrations, ensuring stability even on construction sites or in factory halls.

The system utilizes secure radio frequency (RF) communication with encoded signals to prevent unauthorized access. It operates on mains voltage of 220V/380V and can handle loads of up to 3500W. The pairing (learning) process between the remote and the receiver is quick and intuitive, following a simple guided procedure with indicator lights. Whether you need to automate gates, industrial machinery, or agricultural equipment, this solution combines power, long-range, and industrial ruggedness in one package.

Specifications
Remote control battery is included.
Take out the insulation strip before using the remote control, otherwise it can't be used
Remote control distance: 1/3/5 km
Operating Temperature :0℃～40℃
Operating voltage: 220V , 380V
Output power:3500W
Voltage Selection
220V -240V is single-phase voltage
380V -415V is three-phase voltage
It says 220V on the 220V -240V package.
It says 380V on the 380V -415V package.
Please don't worry about sending the wrong goods Please Be Assured Use.

Distance
Product remote control distance is the longest distance which is measured on open area. Because remote control signal is
interfered by mountain, electric field, magnetic field, houses, trees and other factors, the actual distance will be different.The
specific distance depends on the actual environment.
Learning Code
Press the learning code for 4-6 seconds, the indicator light flashes, loosen your finger, and press any button of the remote
control.Then press the "on" button, and the indicator light flashes, and there is a sound from the receiver. Press the "off" key,
and the indicator light is always on, it means you learn it successfully