Water Pump Wireless Industrial Remote Control Switch

This powerful wireless remote control switch is specially designed for remote control of water pumps, irrigation systems and other single-phase industrial or household loads. It offers an impressive range of up to 5 kilometers in open areas, allowing control from a very long distance. The system operates on mains voltage 220V AC and can handle loads of up to 3500W, making it suitable for most standard pumps and motors. The receiver has an IP53 protection rating, meaning limited protection against dust and water splashes, and pairs with the included remote battery easily via a "learning" (coding) process.

The product is an ideal solution for agriculture (irrigation), industrial sites, construction sites or large households, where convenient and quick remote switching of equipment is needed. It is important to note that the 5 km range is maximum under ideal conditions (open area). The presence of obstacles such as buildings, trees, or other electrical fields can significantly reduce it. Installation and connection of the system to the mains voltage must be performed by a qualified electrician, observing all safety measures.

Specifications
Remote control battery is included.
Take out the insulation strip before using the remote control, otherwise it can't be used
Remote control distance: 1/3/5 km
Operating Temperature :0℃～40℃
Operating voltage: 220V , 380V
Output power:3500W
Voltage Selection
220V -240V is single-phase voltage
380V -415V is three-phase voltage
It says 220V on the 220V -240V package.
It says 380V on the 380V -415V package.
Please don't worry about sending the wrong goods Please Be Assured Use.

Distance
Product remote control distance is the longest distance which is measured on open area. Because remote control signal is
interfered by mountain, electric field, magnetic field, houses, trees and other factors, the actual distance will be different.The
specific distance depends on the actual environment.
Learning Code
Press the learning code for 4-6 seconds, the indicator light flashes, loosen your finger, and press any button of the remote
control.Then press the "on" button, and the indicator light flashes, and there is a sound from the receiver. Press the "off" key,
and the indicator light is always on, it means you learn it successfully