- Stock: Out Of Stock
- Brand: OEM
- Reward Points: 2
- Model: MT3608
- Product Code: 6413
- Warranty: няма
The MT3608 module is a compact and high-efficiency step-up (boost) DC-DC converter, designed to convert low DC voltage to a higher one. It operates with a wide input range from 2V to 24V DC and can generate an adjustable output from 5V to 28V DC, with a maximum output current of 2 amperes. Thanks to the high-frequency MT3608 chip (1.2MHz), the module achieves efficiency up to 97%, offering compact dimensions (36x17x14 mm) and stable operation even at low input voltages. This makes it ideal for portable and battery-powered projects where size and efficiency are key.
This module is the perfect solution for powering 12V or 24V LED strips from single lithium batteries (such as 18650), for creating portable chargers, for boosting voltage in DIY projects with Arduino/Raspberry Pi, or in automotive electronics. For prolonged operation at currents above 1A, it is recommended to provide additional cooling. It is important to note that the output voltage must always be higher than the input voltage for proper operation of the step-up converter. If the output voltage does not adjust, it is recommended to rotate the potentiometer counterclockwise more than 20 times.
Specification:
Product name: MT3608 2A DC-DC Adjustable Booster Power Module
Module Feature:
Maximum Output Current: 2A
Input Voltage: 2V ~ 24V
The Maximum Output Voltage: >28V
Efficiency: Max 93%
Mechanical Properties:
Product Size: 36 mm x17 mm x 14 mm
Method Of Use:
The module of the IN+ and - after 2~24v, IN adjusting the potentiometer can adjust output voltage, output voltage is greater than the input voltage.
Note:
1.The input voltage should not exceed the maximum input voltage.
2.The peak current output current is no more than 2A
When the module output voltage can not be adjusted, the output voltage is always the same with the input voltage.Please adjust the potentiometer counterclockwise 20 laps or more.
