- Stock: 10
- Brand: Taxnele
- Model: TXATS2-63/2P
- Weight: 1.11kg
Taxnele TXATS2-63/2P is a 2-pole automatic transfer switch designed to automatically transfer a load between a normal power source and a backup power source. The device monitors the availability of the power sources and can automatically transfer the load to the reserve source when the normal supply fails.
The 2P version is designed for AC 200–240V operation at 50/60Hz, with a maximum rated current of 63A. When the normal power source becomes available again, the switch can automatically transfer the load back to the normal source, which has priority.
The Taxnele TXATS2-63/2P provides both automatic and manual operating modes. In automatic mode, the device transfers the load according to the availability of the two power sources. In manual mode, the switching direction can be selected manually by the user.
This automatic transfer switch is suitable for electrical distribution panels, backup power systems, dual-source AC installations, single-phase applications and other systems where automatic transfer between two available power sources is required.
Please note that the load supply is interrupted during the transfer operation. The specified switching time is less than 4 seconds. The device does not start or stop a generator; it only transfers the load between the available power sources.
Technical Specifications:
- Manufacturer: Taxnele
- Model: TXATS2-63/2P
- Type: Automatic Transfer Switch (ATS)
- Poles: 2P
- Maximum current: 63A
- Rated voltage, 2P: AC 200–240V
- Frequency: 50/60Hz
- Operating modes: Automatic / Manual
- Switching time: <4s
- Priority source: Normal power
- Automatic transfer: Yes
- Automatic transfer to backup source after normal power failure: Yes
- Load power is interrupted during switching
- Standards: IEC60947-6-1, GB/T14048.11
- Manufacturer: Taxnele
