- Stock: 110
- Brand: Taxnele
- Reward Points: 165
- Model: ATS-4PV/63A
- Weight: 0.84kg
Under 8ms Switching Time | DIN Rail Mounted for Solar & Backup Power Systems
NOTED: The Source B must power on if use this PV type. Because the voltage of the inverter is not stable
PV Inerter type have to connect Inverter for SourceA, Inverter and PV system as main power.
Only for for PV system and Inverter to city power, not for City Power and Generator to City Power and Generator.
The Taxnele ATX-4P is a 4-pole automatic transfer switch (ATS) specifically designed for systems using a photovoltaic inverter and backup grid power source. It provides automatic transfer between two power sources when the operating condition of the primary source changes or the source becomes unavailable.
The ATS features a 4P configuration, allowing all four conductors to be switched simultaneously according to the electrical installation requirements. Available current ratings include 63A, 100A and 125A.
According to the product information, the PV version uses PC-level switching with a transfer time of less than 8 ms, helping to minimize the interruption when transferring between the two sources.
Key Features:
- Manufacturer: Taxnele
- Model: ATX-4P-63A
- Type: Automatic Transfer Switch (ATS)
- Configuration: 4P / 4-pole
- Application: PV inverter and grid power
- Available ratings: 63A / 100A / 125A
- Dual power source switching
- Automatic transfer between power sources
- Transfer time: less than 8 ms
- DIN rail mounting design
- Suitable for photovoltaic and inverter-based power systems
Applications:
The Taxnele ATX-4P is suitable for solar photovoltaic systems, PV inverters, backup power installations and electrical distribution panels where automatic transfer between inverter and grid power is required.
Important: This model is designed specifically for PV system/inverter to grid power applications. It is not intended for a standard “utility power + generator” configuration. For the PV version, Source B must be powered because the inverter voltage may not be stable.
