- Stock: 2
- Brand: OEM
- Reward Points: 2
- Model: M2/0-196
W1701 precise adjustable temperature control thermostat switch xh-w1701 12V temperature controller module
Product Name: high precision digital temperature control switch
Specifications: W1701
Temperature control mode: on-off
Control mode: heating, cooling and cooling
Range of temperature control: 20-90 DEG C
Control accuracy: 0.1 DEG C
Backlash setting: 1-10 DEG C
Refresh frequency: 0.5S
Supply voltage: DC12V
Static current: less than 3MA operating current is less than or equal to 60MA
Output voltage: DC12V
Output power: maximum 200W
Appearance size: 36.5*36.5*18mm
Mounting screw: M3*2 diagonal dimension 39.5mm
Temperature probe: 10K thermistor, B25=10K 39500.5 meters waterproof sensor
Environmental requirements: environmental requirements: -10~60 degrees C, humidity 20%-85%
According to their own needs, according to the drawings connected to the circuit, power supply for DC12V (+12V is positive, GND is negative)
The temperature probe is placed on the object that needs to be controlled
For heating: please connect 12V heater to -H+ (note positive and negative pole)
For refrigeration: please connect the cooler to +C- (note positive and negative pole)
For heat dissipation: please connect the cooler or cooling fan to the +C- (note positive and negative pole)
Indicator status description
The red indicator light on the circuit board indicates that the +C- has an output
No light indicating heating (-H+) with output
Parameter function description
The temperature control switch board set by dial, 1-4 for the temperature control 5-6 choice for return difference set, from right to left in binary mode to set, when the thermostat switch is fully closed state, only -H+ has not controlled output.
Example: add the temperature control switch to the radiator. When the temperature is above 40 degrees, turn on the cooling fan. When the temperature is below 35 degrees, turn off the cooling fan
Connect the DC12V to the power supply and connect the cooling fan to the +C-
The parameter we want to set is the temperature control =40, the difference is =5
According to the parameter table and known as the 24 open for temperature 40 degrees, 5 degrees for 5 other return difference is fully set, OK!
- Доставка до адрес: 8 лв.
- Доставка до офис на Еконт: 6 лв.
- Доставка до офис на Спиди: 5 лв.
- Доставка до автомат на Спиди: 4 лв.
- при избор - "плащане при доставка", се добавя 2.00 лв такса наложен платеж.
- За фиксиран час се добавя 3 лв.
- Безплатна доставка при поръчка над 200 лв.
