Peacefair PZEM-022
from
38.00 лв.
Price in reward points: 342
- Stock: 2
- Brand: Peacefair
- Reward Points: 11
- Model: M2-251-PZEM-022
Products Sold: 6
Product Views: 966
Всички поръчки се изпращат с застраховка и преглед. Моля при получаването на продукта да го прегледате пред куриера за евентуални наранявания при превоза.
Стоката се изпраща до 48 часа (в работни дни) след направената поръчка. Имате право да върнете стоката в 14 дневен период, като цената на доставката при връщането е за ваша сметка.
This product is an all in one instrument that can display voltage, current and Wattage in WH. It can also record power consumption over a designated time period and ring its’ internal alarm when it detects overload on the circuit.
Features:
- Electrical parameter measurement function (voltage, current, active power, energy, frequency, power factor)
- Overload alarm function (over power alarm threshold, backlight and power flashing to alarm)
- Power alarm threshold preset function (can set power alarm threshold)
- The energy can be reset using the key
- Store data when power off
- Large-screen LCD
- Backlight function
- Key Function
♦Backlight control
Short press the key to turning on or off the backlight, the backlight has memory function, it can store the on or off state when power off.
♦Reset energy
Step1: Long press the key for 5 seconds until the energy value flash, then release the key.
Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state.
Step3: If there is no operation on the key within 5 seconds, it means the energy value is not cleared and will exit the reset state.
♦Set power alarm threshold
Step1: Long press the key until the LCD screen display “SET CLr”, then release the key to enter the setting state
Step2: Power window display the current power alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above.
Step3: After finish the setting, long press the key over 5 seconds will store automatically and exit, the range of active power threshold is 0.0~2.5kW. it can display six parameters at the same time.
Product Type | PZEM-020 |
Current Range | 0-100A(with coil CT) |
Voltage Range | AC 80-260V |
1.Measure voltage, current, active power, energy, frequency, power factor 2. Overload alarm 3. Power alarm threshold preset 4. Reset energy 5. Store data when power off. 6. Large-screen LCD 7. Backlight function. | |
Weight | 111g |
- Доставка до адрес: 8 лв.
- Доставка до офис на Еконт: 6 лв.
- Доставка до офис на Спиди: 5 лв.
- Доставка до автомат на Спиди: 4 лв.
- при избор - "плащане при доставка", се добавя 2.00 лв такса наложен платеж.
- За фиксиран час се добавя 3 лв.
- Безплатна доставка при поръчка над 200 лв.